ESD - Electrostatic Discharge Matting

Static Matting

• Tough, long lasting static dissipative anti-fatigue floor mat
• Easy wipe clean surface
• Grounded via a 10mm male stud fitted to the mat - maximum performance when used with mat grounding wire.
• Effective in reducing fatigue from standing
• Actual resistance measurements are 1 x 10 9 Ω to 1 x 10 10 Ω

Sizes and Colours: 0.6m x 0.9m, 0.9m x 1.5m, 0.9m x 18.3m, 0.9 x per linear metre. Grey

HR Matting

• Tough, long lasting static dissipative work surface mat
• Easy wipe clean surface
• Designed to protect the bench and components from static electricity
• Very good lay flat properties
• Incorporates a conductive buried layer ensuring superior ESD (electro static discharge) protection
• Grounded by a 10mm male stud fitted to the mat
• Meets or exceeds IEC 61340-5-1resistance requirements
• Actual resistance measurements are 1 x 10 7 Ω to 1 x 10 9 Ω

Sizes and Colours: 0.6m x 1.2m, 1.2m x 3m, 1.2m x 15m, Blue or Grey

Bench Static Matting

• Superior three layer static dissipative work surface mat
• Easy wipe clean surface
• Designed to protect the bench, components and operators from static electricity
• Very good lay flat properties
• Incorporates a conductive buried layer ensuring superior ESD (electro static discharge) protection
• Grounded by a 10mm male stud fitted to the mat
• Meets or exceeds IEC 61340-5-1 resistance requirements
• Actual resistance measurements are 1 x 10 7 Ω to 1 x 10 9 Ω

Sizes and Colours: 0.6m x 30m, 1.2m x 30m, 0.6 x per linear metre Blue or Grey

POP Mat

• Comfort work pads designed to protect products from ESD (electro static discharge) and hard bench top surfaces
• Very good lay flat properties
• Manufactured in 6mm thick expanded foam with ESD (electro static discharge) fleece
• No need for additional ground lead when used on top of existing grounded, conductive or dissipative work tops
• Surface resistance 7 x 10 8 Ω to 5 x 10 9 Ω when measured on its own
• Surface resistance when installed on top of existing ESD (electro static discharge) surface 10 9 Ω (suitable for ESD protection in the electronics industry)

Sizes and Colours: 0.48m x 0.58m, 1.3m x 12.2m Height: 6mm Blue or Grey

ESD ACCESSORIES

Wrist Bands

• High quality, long lasting adjustable wrist bands
• Manufactured using a crocheted style elasticised material
• Offers best possible comfort and function
• Silver coated monofilaments are floated on the inner surface of the band ensuring best band to skin contact
• Easy to adjust
• Fitted to the coiled ground wire by a 10mm male stud
• Meets or exceeds IEC 61340-5-1

Colour: Dark blue with yellow buckle

Heel Grounder

• Designed to ensure operator grounding when used on suitable conductive or dissipative flooring
• Easy and comfortable, suitable for all shoe shapes and sizes
• Fitted with 1 meg ohm resistor for operator safety
• Manufactured from a hard wearing, long lasting rubber
• Conductive tab fitted ensures good and reliable skin contact
• Recommended that two are used at all times to ensure complete ESD (electro static discharge) safety and uninterrupted operator grounding

Earth Bonding Plug

• Ideal for use as a grounding point for bench / floor mats and personnel.
• Incorporates a 10mm male stud for grounding wire connection
• No resistor is fitted as this is integral with all ground cords supplied
• Designed to fit UK standard mains plug outlets
• Both neutral and mains voltage pins are plastic, only the earth pin is metal for guaranteed safety

Colour: Yellow

Floor Mat Grounding Wire

• Ground wire for floor mats
• Incorporates a 10mm female stud on each end for connection to mat and earth plug
• Fitted with an integral 1 meg ohm resistor
• Length 2 metres

Colour: Yellow with green connectors

Coil Cord

• PE coil cords
• Good coil memory, so no tangles
• 1 meg ohm resistor incorporated for operator protection
• 10mm stud to 10mm stud
• Length 1.8 metres

Colour: Yellow

Common Point Ground Wire

• Ideal for use as a ground wire for mats and operators
• Incorporates a 10mm female stud at one end for connection to a 10mm male stud on an earth plug.
• Includes a 10mm male stud and a 4mm banana socket for connection to the operators coil cord
• 4.5m long wire for convenient connection to an available earth plug

Colour: Yellow

ELECTRICAL SAFETY MATTING

Electrical Safety Matting

• Designed specifically for use in front of open switchboards and high voltage equipment
• Provides safety for operators against electrical shocks
• Fine fluted surface provides slip resistance benefits
• 6mm thick – tested to 11,000 volts for 450 volt rated working
• 9.5mm thick – tested to 15,000 volts for 650 volt rated working (conforms to BS921/1976)

Sizes and Colour:
6mm – 0.9m x 10m, 0.9m x per linear metre
6mm – 1.2m x 10m, 1.2m x per linear metre
9.5mm – 0.9m x 10m, 0.9m x per linear metre
9.5mm – 1.2m x 10m, 1.2m x per linear metre

Black

INDUSTRIAL COMMERCIAL CATERING
ESD
LEISURE
FLOOR TAPE FIRST STEP

TOP

TOP